Vietnamese
Loader cycle that will disprove common knowledge in loading technology
This new 3-axis loader is even faster with a loading time of 6 sec.This machine is equipped with high speed shutter,reducing shutter open/close time into half(with open/close <0.5 sec).Aminimum 18 sec cycle time (OP1-2)is achieved with this new loader cycle idea.
Pursuit of both cutting capability and precision
The adoption of the box sliding for the slide,φ100mm maximum spindle diameter and 11/7.5kW moter.Installation of the spindle base cooling system for stable machining precision.
Lower center of gravity・Space-saving design
A compact 1,890mm width machine design ensuring a 150mm X-axis and 160mm Z-axis slide stroke with a 1,000mm spindle center height.Easy acces to the spindle chuck and work turn device and easy change-over.
| Item | Ability | Unit | |
|---|---|---|---|
| Chuck size | Collet, 8 × 2 | inch | |
| Spindle | Spindle bearing I.D. | φ100 | mm |
| Spindle speed | Max. 4,000 | min-1 | |
| Tool post | Type | 8-station turret × 2 | |
| Max.stroke | X:150 Z:160 |
mm | |
| Rapid traverse rate | X:24 Z:24 |
m/min | |
| Speendle motor | AC11 / 7.5 ×2 | kW | |
| W × L | 1,890 (2,250 ※) × 2,140 | mm | |
| Controller | TAKAMAZ & FANUC 0i-TD | ||
※Machine width with loader spec.
| Item【Loader specifications】 | Ability | Unit |
|---|---|---|
| ΣiGTH150 | ||
| Workpiece diameter (Reference) | φ150 | mm |
| Workpiece length (Reference) | 50 | mm |
| Max. load capacity | 3.0 | kg |
| Rapid traverse rate | X:35 Y:125 Z:170 | m/min |
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
Awards in the 2014
◆Recipient of the Examination Committee Special Award at the 44th Machine Industry Design Awards◆
The Takamaz product XW-130 was awarded the Examination Committee Special Award at the 2014 Machine Industry Design Awards held by Nikkan Kogyo Shimbun.
