Vietnamese
Ideal machine construction for shaft work
The unique 1-spindle 2-turret and servo-controlled tailstock configuration dramatically improves shaft work productivity. The X-axis stroke is set to max. 115 mm. Crankshafts up to 700 mm long can also be handled. (Some restrictions apply)
Increased productivity with high efficiency machining
The cycle time is shortened by balance cutting with symmetrical twin turrets, and simultaneous left/right individual machining. Added to that, adoption of a 10-station turret gives leeway in the tool layout.
Equipped with a new loader with a capacity of 10 kg (max. 20 kg)
We propose high productivity through automation by calling on the automation know-how that we pride ourselves on. Moreover, excellent accessibility is assured by a distance from the front of the machine to the spindle of 370 mm, so it is possible to work in a posture with little strain, while a square design that also emphasizes maintainability is adopted, achieving high levels of safety and working convenience.
High rigidity and compact body
The use of a large-diameter spindle (bearing inner diameter φ120 mm) and square slideways achieves heavy-duty cutting with a cross-sectional area of 1.5 square millimeters while realizing space savings of approximately 32% compared to existing models, greatly improving the productivity per unit area.
| Item | Ability | Unit | ||
|---|---|---|---|---|
| A-type | B-type | |||
| Chuck size | 8 | 8 (10 Opt.) | inch | |
| Spindle | Spindle bearing I.D. | φ100 | φ120 | mm |
| Spindle speed | Max. 3,500 | Max. 3,500 (3,000 Opt.) | min-1 | |
| Tool post | Type | 10角タレット×2 | ||
| Max.stroke | X:115 Z:650 |
mm | ||
| Rapid traverse rate | X:16 Z:30 |
m/min | ||
| Spindle motor | AC15 / 11 | AC15 / 11 (18.5 / 15 Opt.) | kW | |
| W × L | 1,960 × 1,720 | mm | ||
| Controller | TAKAMAZ & FANUC 0i-TD | |||
| Item【Loader specifications】 | Ability | Unit |
|---|---|---|
| ΣiGT700 | ||
| Workpiece diameter (Reference) | φ20～φ55(～φ70) | mm |
| Workpiece length (Reference) | 400～700 | mm |
| Max. load capacity | 10(20) ※1 | kg |
| Rapid traverse rate | X:50 Y:90 Z:90 | m/min |
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
※1.The standard loader specification can transport 10kg workpiece. The maximum specification is 20kg and is offered as an option.
