Vietnamese
Loader workpiece machining capability with Z-axis stroke extension
The standard Z-axis stroke specification is increased by about 40% from 550mm to 800mm.It can handle long shaft workpieces of up to 720mm, and provides a wide range of machining capability.
Reduction of idle time by mounting a tailstock driven by a servo unit
The hydraulic type driven tailstock on the standard machine is replaced with a servo driven type that is controlled with the change in the cutting program resulting to having a capability to handle different types of workpiece with significant reduction in cycle time.
Improved machine operation
In order to achieve improved workability when replacing chuck or workpiece as compared with the standard model,the length from the front door to the center of the spindle is reduced from 510mm to 450mm.
| Item | Ability | Unit | ||
|---|---|---|---|---|
| Standard type | Power tool type | |||
| Chuck size | 8（10 Opt.） | inch | ||
| Spindle | Spindle bearing I.D. | φ100（φ120 Opt.） | mm | |
| Spindle speed | Max. 3,500 (5,000・4,000 Opt.) | min-1 | ||
| Tool post | Type | 12-station turret | ||
| Max.stroke | X:225 Z:800 |
mm | ||
| Rapid traverse rate | X:18 Z:24 |
m/min | ||
| Power tools | Tool storage capacity | – | 12 | pcs. |
| Rotation speed | – | 4,000 | min-1 | |
| Capabilities | – | φ20 M4~M16 | mm | |
| Spindle motor | AC11 / 7.5 (18.5 / 15 Opt.) | kW | ||
| W × L | 2,900 × 1,845 | mm | ||
| Controller | TAKAMAZ & FANUC 0i-TD | |||
| Item【Loader specifications】 | Ability | Unit |
|---|---|---|
| ΣiGH200 | ||
| Workpiece diameter (Reference) | φ150 | mm |
| Workpiece length (Reference) | 50 | mm |
| Max. load capacity | 1.5 | kg |
| Rapid traverse rate | Y:85 Z:155 | m/min |
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
